1.4
SPECIFICATIONS
Size:
6.9"W x 4.9"L x 2.4"H sloping to 1.4"H
Mounting:
Bench Top
Construction:
Solid-state, SMT PC Board
Power:
+5VDC, 1000mA regulated
Input Signal:
Video, composite, 1 V p-p, 75
Ω
Output Signal:
Video, composite, 1 V p-p, 75
Ω
Controls:
Pattern: Off/On
Mode: Run/Setup/Hold to Save
Select: Line 1/Line 2/Line 3/Line 4/Rectangle/Circle 1/Circle 2
Color: White/Black/Gray/Invisible
Move All (hold down while operating a position control)
Move Selected Object or All Left
Move Selected Object or All Down
Move Selected Object or All Up
Move Selected Object or All Right
Decrease Line Length or Rectangle Width
Increase Line Length or Rectangle Width
Rotate Line CCW or Decrease Rect. Height or Circle Dia.
Rotate Line CW or Increase Rect. Height or Circle Dia.
Indicators:
Pattern Off (red)
Run Mode (controls are runed when lit)
Setup Mode (controls are active when lit)
Line 1 Selected for adjustment
Line 2 Selected for adjustment
Line 3 Selected for adjustment
Line 4 Selected for adjustment
Rectangle Selected for adjustment
Circle 1 Selected for adjustment
Circle 2 Selected for adjustment
Connectors:
Video In: BNC
Video Out: BNC
+5 VDC Power: Coaxial 5.5mm x 2.5mm, center pin positive
5
