BACK
BACK
BACK
BACK PANEL
PANEL
PANEL
PANEL
OPERATIONS
OPERATIONS
OPERATIONS
OPERATIONS
DMX512
DMX512
DMX512
DMX512 Connection
Connection
Connection
Connection
Only use a stereo shielded cable and 3-pin plugs and connectors in order to
connect the controller with the fixture r one fixture with another
。
Occupation
Occupation
Occupation
Occupation of
of
of
of the
the
the
the XLR
XLR
XLR
XLR Connection:
Connection:
Connection:
Connection:
The wire must not come into contact with each other, otherwise the fixtures will not work at all, or will
not work properly
If you are using controllers with this occupation, you can connect the DMX output of the controller directly with the
DMX input of the first device in the DMX chain. If you wish to connect DMX controllers with other XLR outputs,
you need to use adapter cables.
Building
Building
Building
Building A
A
A
A Serial
Serial
Serial
Serial DMX
DMX
DMX
DMX Chain
Chain
Chain
Chain
：
：
：
：
Connect the DMX output of the 1
st
device in the DMX chain with the DMX input
of the next device. Always connect one output with the input of the next until all devices are connected.
Caution
Caution
Caution
Caution
：
：
：
：
At the last device, the DMX cable has to be terminated with a terminator. Solder a 120 ohm resistor
between Data (-) and Data (+) into a 3-pin XLR plug and plug it in the DMX output of the last device.
DMX
DMX
DMX
DMX Start
Start
Start
Start Address
Address
Address
Address Setting
Setting
Setting
Setting
This device has 4 or 9 DMX channels. If you set, for example, the start address to channel 1, the device will use
the channels #1
st
to 4
th
or
# 1
st
to 9
th
for control. The first available channel for the next fixture will be the 5
th
or
10
th
. Please be sure that you do not have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX chain. If two, three or more devices are addressed similarly,
they will work similarly.
Press the menu button until it shows AXXX in the display. XXX is the address you se last time. Press UP or
DOWN button to select your desired address, etc, A001. Press ENTER button to save or press MENU button to
exit.
LED
LED
LED
LED Display
Display
Display
Display Illustration
Illustration
Illustration
Illustration
MENU:
MENU:
MENU:
MENU:
"EXIT"button. Only exit but will stay in the current working mode.
UP:
UP:
UP:
UP:
Increase DMX value or to move upper menu.
DOWN:
DOWN:
DOWN:
DOWN:
Decrease DMX value or move to next menu.
ENTER:
ENTER:
ENTER:
ENTER:
Select the need menu.
Menu
Menu
Menu
Menu Illustration
Illustration
Illustration
Illustration
ADDR:
ADDR:
ADDR:
ADDR:
A001-A512
CHND:
CHND:
CHND:
CHND:
DMX channel modes, 4CH or 9CH
SLND:
SLND:
SLND:
SLND:
Select MASTER/SLAVE mode
SHND:
SHND:
SHND:
SHND:
SOUN means sound control. COLO means colors (COL1-CLO15) AUTO means auto mode(Speed:
SP01-SP08). FADE means color fading(Speed: SP01-SP08).
MANU:
MANU:
MANU:
MANU:
Manual control for colors (RED: 0-255; GREEN: 0-255: BLUE: 0-255; WHITE: 0-255). When it's set, it will
stay in current value even the power is OFF.
TEST:
TEST:
TEST:
TEST:
Colors auto test(R,G,B,W)
FHRS:
FHRS:
FHRS:
FHRS:
Total operating times for the light.
TECHNIAL
TECHNIAL
TECHNIAL
TECHNIAL SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Input Voltage
AC90-260V 50/60Hz
Power Consumption
75W
LED Quantity
7*10W LEDs
（
4-IN-1
）
Life Span
50000H
DMX Channel
4CH/9CH
DMX
DMX
DMX
DMX Channel
Channel
Channel
Channel
4CH Mode
Channel
Function
Value
Description
1
Red
0-255
0-100%
Red Dimmer
2
Green
0-255
0-100%
Green Dimmer
3
Blue
0-255
0-100%
Blue Dimmer
4
White
0-255
0-100%
White Dimmer
