Page 2
Double Bookshelf Headboard
(Optional)
Double Bookshelves
are attached near the top of the legs. The shelves have a Backboard to support the weight of the
items on the shelf and are required to be installed.
Double Bookshelf Parts List
:
(2) Shelves (4) Shelf Supports 2x2x5-1/2” Screws: 2-1/2” 1-5/8” 1-1/4”.
Following the diagram below, attach (2) 2x2x5-1/2” Shelf Supports 11-1/2” from the top of the legs with 2-1/2” screws.
Attach the shelf to the Supports with 1-5/8” screws. Now attach the Shelf Supports 3-1/2” from the top and follow the
same procedure. Note: The lower shelf can be attached at any height. The photo below shows the optional safety rails
which typically are not used for very low beds.
Install the Backboards to the back of the shelves. Use 1-5/8” screws at the ends when screwing into the Legs and 1-1/4”
screws when screwing into the shelf.
