4.0.2 Motor force (TORQUE)
The motor torque in function of the dancer position is set with the
TORQUE
jumper. If the
jumper is plugged in on the
right
side (6) the force is
higher
, if it is plugged in on the
left
side
(1) the force is
lower
. Figure 12 shows the position of the
TORQUE
jumper.
Figure 12
4.0.3 Winder (WIND)
The winder provides a constant tension on the paper web. The motor is always under current.
The tension force must not be too high to avoid impacts on the paper web.
The unwinder must unwind the paper roll as a function of the dancer position. When unwinding
the unwinder needs a high force to accelerate the paper roll.
The
WIND
jumper is used to set the start force of rewinder or unwinder. When the jumper is
plugged in on the
left
side (1), the force becomes
lower
, if it is plugged in on the
right
side (6),
the force becomes
higher
. Figure 13 shows the position of the
WIND
jumper
.
Figure 13
WIND
TORQUE
DANCER
1
6
right: higher current
left: lower current
+
-
Winkel
TROQUE
WIND
TORQUE
DANCER
1
6
left: lower current
right: higher current
+
-
TROQUE
Winkel
5999.554-01A 16.08.2001 WM
Page 20 / 26
