4
EN
G
LI
SH
Product Description
Flat iron with ceramic plates, 9 different temperature settings, becomes hot within several
seconds, safety grip handle, 210 cm swivel cord – no tangle. 230 VAC/90 W.
Use
1. Plug the flat iron into an electrical outlet (with dry hands).
2. Press and hold the (ON/OFF) switch until the display lights up to turn on heat. The display
shows temperatures (100 °C to 200 °C), heat can be regulated by pushing (+) repeatedly
to raise the temperature in 9 steps. The actual temperature of the flat iron is shown on the
display. Push (–) repeatedly to lower temperature.
3. Adjust to desired temperature. Remember that thicker hair requires higher temperature
and thinner hair uses lower temperature.
4. Hold flat iron or lay it on a heat tolerant surface until it is completely warm and ready
for use.
5. Do not use the flat iron until hair is completely dry and well-combed.
6. Divide hair in sections and use hair clip to hold it separate. Thick or long hair may need to
be flattened several times.
7. Start at the top of the head and continue downward. Make sure that the ceramic plates are
in motion the entire time and that they don’t remain still in one place. Repeat until all hair is
flattened.
8. To turn off flat iron push and hold in (ON/OFF) switch until display shuts off, unplug the cord
when you are finished. The display shows ”OFF” when flat iron is turned off with switch.
9. Let the flat iron cool completely before it is put away for storage.
Note!
• The flat iron may smoke a little or release a burning smell for a short while the first time it
is used. It is completely normal and will stop after 1 to 2 minutes.
• We recommend that you use a heat protecting hair care product on your hair before you
begin using the flat iron.
Warning!
• The flat iron’s ceramic plates become very hot, therefore use the iron carefully and with
caution.
• Do not use the flat iron if you have sensitive hair or have a damaged scalp, if you are
heat-sensitive or if you have wet hair.
• The flat iron is connected to the electrical current even if it is shut off. Remember to pull
out the plug after you have finished using it.
• Do not use the flat iron on artificial hair, wigs etc. The hair can melt.
