4. Insert one end of each main pole into pins in front &
back corners of tent. (Fig. 2A)
5. Go to opposite end of each pole and gradually apply
pressure to the pole forming an arch. Insert the pin
into the pole end at the corners of tent. (Fig. 2 & 2A)
6. Attach frame clips along edges of tent to main poles.
(Fig. 2B)
7. Stretch corners and sides of tent until fl oor is taut
then hammer stakes through loops to secure. (Fig. 2C)
STITCH LINE
VELA
TM
TENT 11’ X 10’
MODEL 2000005750
To Set Up Tent
1. Unfold tent and spread out on a clean, level
surface with the door facing the desired
direction. (Fig. 1)
2. Assemble two main tent poles by inter-locking
longer, black shock-corded, poles.
3. Insert main poles through sleeves in top of tent
forming an “X” as shown. (Fig. 1)
1. Assemble the grey shock-corded vestibule pole.
2. Unfold rainfl y; then drape over tent with vestibule
fl aps positioned on both sides of the door. (Fig. 3)
3. Slide the vestibule pole through sleeve under
front edge of rainfl y. (Fig. 3)
4. Locate all hook and loop fasteners on underside
of rainfl y; then wrap around the main pole to
secure. (Fig. 3A)
To Attach Rainfl y
(continued on other side)
Door
Fig. 3
Vestibule Pole
Sleeve on Front of
Rainfl y
3A
Main Poles,
Black
Main Poles
Vestibule Flaps
2B
2C
2A
Door
Door
Pole Descriptions
Pole
Pole
Pole
Description
Qty.
Dia.
Repair Kit Replacement Kit
Main Pole, black
2
11mm
5010000539 5010000549
Vestibule Pole, grey 1
11mm
5010000539 5010000549
Before you begin
Read all instructions before set up.
Select a level site clear of rocks, branches, and other hard or sharp
•
objects, to install your tent.
WARNING: Keep clear of overhead power lines.
Do not set up your tent under trees because of potential lightning strikes
•
or falling tree limbs in inclement weather.
Secure with all stakes and guylines provided to prevent property damage
•
or personal injury.
For best results in windy conditions, position narrow end of tent into the wind.
•
Enlist the help of at least one other person to assist you when it is time to
•
assemble the tent.
Fig. 1
Fig. 2
