Coleman POWERSPORTS BK160, Owner'S Manual

Page: 19 / 53

14
BREAK - IN
Observe your initial and most
critical maintenance service
The initial service( break in maintenance )
is the most important service for your Go
Kart. During the break-in time frame, all
of the engine components will have mated
together and seated. Maintenance
required as part of the initial service
includes correction of all adjustments,
tightening of all fasteners and replace-
ment of dirty oil. Timely performance of
this maintenance will help make sure your
Go Kart will have the best service life and
perf ormance of the engine.
BREAK IN PERIOD
The initial 20 hours of operation is most
important in the life of your Go Kart.
Proper operation during this break in
period will help assure maximum life of
your Go Kart engine.
The following guidelines will explain the
proper break in procedures.
1.
During the first 10 hours of
operation, do not apply more than
1/2 throttle for long periods of
time.
Vary the engine speed
Make sure to vary the engine speed
during the break in period, this allows the
engine to load and unload which helps
the parts to seat properly. It is essential
to place some stress on the engine during
the break in process, however, too much
stress could cause damage to the engine
components. Be careful not to load the
engine too much.
Allow oil to circulate before
operating.
Always allow the Go Kart engine to warm
up before operating. This allows the oil
to circulate throughout the engine which
lubricates the components.