7
Follow these steps to Stow-A-Way the pressure washer:
1.
When mounting the hanging bracket for the pressure
washer unit make sure that the appropriate hardware is used
when attaching the bracket to the wall studs. For wood studs
it is recommended to use lag bolts and for metal studs to use
machining screws and nuts to attach the hanging bracket.
2.
Stop unit and allow engine and muffler to cool before
attempting storage.
3.
Pull spring loaded lock pin on frame out and hold.
4.
While placing your foot on the lower frame tube and
pushing on the handle tube with your hand.
5.
Push handle until the lock pin engages. The unit is
now ready to store on bracket mounted to wall.
STOW-A-WAY INSTRUCTIONS
•
Be sure hanging bracket is mounted directly to studs in
wall. Failure to do this may cause damage to unit,
property damage or serious personal injury.
•
Be sure that engine and muffler are cool before storing
unit. Failure to do this may cause damage to unit,
property damage or serious personal injury.
English