1. Place battery in battery box under driver side
seat area and press rubber pads into battery bracket.
2. Secure battery in place with battery
bracket and 2 - M6X16 Bolts
5. Re-install battery cover and secure with M6X20
Wing Bolts and M6 Flat Washers.
6. Install M6X20 Wing Bolts and M6 Flat
Washers on passenger side fuel pump
cover.
Rubber Pads
for Battery
(Hardware Fig. #15)
Battery
Positive (+)
Red
Negative (-)
Black
Tools needed:
8 mm Socket/Wrench
10mm Socket/Wrench
2 - M6X16 Bolt
(Hardware Fig. #6)
2 - M6 Flat Washer
(per side)
(Hardware Fig. #16)
2 - M6X20 Wing Bolt
(per side)
(Hardware Fig. #7)
9
Note: Follow manufacturer’s instructions
on preparing battery with fluid before
installation. .
BATTERY INSTALLATION
4.
The 3 black
wires attach to
NEGATIVE (-)terminal.
3.
The 3
r
ed
w
ires attach to
PO) terminal.
WARNING! ALWAYS ATTACH RED
POSITIVE (+) WIRES BEFORE
BLACK NEGATIVE (-) WIRES TO
BATTERY.
Summary of Contents for OUTFITTER 550
Page 11: ...PARTS SCHEMATIC REFERENCE 10...
