To Install Or Replace Batteries
Your new pump operates on 4 “D” cell batteries. For longest life,
use alkaline batteries.
1. With pump off, press two release tabs to remove 4D battery
pack. (Fig. 1)
2. Press snap feature to open the 4D battery pack top cover.
(Fig. 2)
3. Install 4 batteries in the correct orientation as shown on the
battery housing. Always be careful that all 4 batteries are
installed correctly. (Fig. 3)
4. Close top cover and install 4D battery pack properly into the
pump. (Fig. 4)
Fig. 1
Fig. 4
Fig. 3
Fig. 2
Note: For optimum performance, alkaline
batteries are recommended.
Alternative Power Sources For This Product
r
2000002672
6V NiMH Rechargeable Battery Pack
r
2000003287
6V Sealed Lead Acid Rechargeable Battery Pack
Note:
To order an alternative power source for this product,
please go to
www.coleman.com
or call Coleman Customer
Service.
Parts List
1. 5010000712
4D (6V) Battery Pack
1
Double Lock™ Valve Operation
CAUTION
: Air temperature and weather do affect the air
pressure in inflatable products. In cold weather your airbed will
lose some pressure due to the fact that the air will contract.
If this occurs, you may want to add a little air to improve your
airbed’s performance. However, in hot weather, the air will
expand. You must let some air out to prevent the airbed from
failing due to overpressure. You should avoid exposing your
airbed to extreme temperatures (hot or cold).
To Open Valve
Open - Step 1:
Internal Seal Closed
Pull open cap.
Open - Step 2:
Fully Opened Valve
Firmly pull cap to unseat valve from
inner yellow post.
Internal
Yellow
Post
Pull to Open
To Close Valve
Push to Close
Internal Seal Closed
Reverse Steps 1 & 2. Make sure valve
seats on inner yellow post.
Fully closed Valve
Close cap.
Important Things You Should Know
r
Carefully inspect the pump for damage before first use and every
use thereafter. Do not use if found damaged.
r
Keep unit out of reach of children.
r
Do not expose to rain or sunlight. Household use only.
Warnings
r
Follow the instructions carefully on articles to be inflated, never
exceed recommended pressure. Bursting items can cause
serious injury.
r
Do not open case, electrical hazards may result. There are no
user serviceable parts.
r
Do not use under wet conditions. Keep away from water.
r
Do not use or place near heaters, open flame or other
hot objects.
r
Never look into or point any opening toward your eyes while
pump is operating.
r
Do not attempt to put any objects into the inflation or deflation
port at any time.
r
Never leave pump unattended while in use.
r
Never allow sand, paper, debris or small articles to be sucked
into pump while operating.
t
DO NOT BLOCK THE AIR VENTS DURING OPERATION, THIS
COULD DAMAGE THE MOTOR.
