4
To Set Up
■
Push outer leg sleeve toward cen-
ter of stand to prevent binding at
pivot point.
■
Extend legs fully.
■
Engage locking buttons.
■
Make sure legs are fully seat-
ed in metal support bracket. You
can visually check that the side
table pin holes are aligned
(where legs meet stand base).
■
Place the
stand outdoors
and set on sturdy,
flat surface.
■
Adjust foot pad
levels if grilling on
uneven surface.
■
Place the stove
onto the stand.
The base of the
stove is designed
to snuggly fit the
stand.
■
Align front of
stove with stand
handle.
Step 3
Step 1
Step 4
Step 5
■
Remove grill, stand and
regulator from packaging.
■
Regulator is packed in
the end of the Styrofoam.
■
Inspect all packing and
remove all parts.
■
Your unit includes:
(1) Stand
(2) Side tables
(1) Stove
(1) Lid
(1) Waterpan
(1) Regulator
(1) Grill
(1) Griddle
■
See replacement parts
list for identification.
Step 6
Locking
Button
■
Remove side tables
from locked storage
position.
■
Insert side tables in
position with a firm push.
The side tables will snap
in place.
Step 8
Step 9
Foot
Pad
Helpful hint:
Use a ground cloth to pro-
tect the finish.
■
Turn the stand upside down.
Step 2
■
While unfolding legs, if you feel
resistance, set legs back in folded
position and slide outer leg sleeve
toward center, then unfold legs.
Outer
Sleeve
Leg
Extend
Legs
Holes must be
in alignment
Step 7
■
Swing wire braces into position and
insert ends of wire braces into holes
in the legs.
Wire
Brace
Notes
13
