Frame Pole Assembly
–The frame is a unique one piece
shock-corded design
–Step 1: Assemble the ridge pole.
(illus. 1)
–Step 2: Extend each leg fully by
connecting the shock corded poles.
(illus. 2)
Connect Tent to Frame
–Unfold and position the tent with the door
facing the desired direction. (illus. 3)
– Attach the poles to the tent corners using
the pin & ring system by inserting the pin
into the end of the pole. Repeat for each
corner. (illus. 4 & 5)
–Stake down tent corners by inserting tent
stake through the ring of the pin & ring
system. (illus. 6)
10’x8’ Outdoorsman
™
Tent
1
2
When You Are Ready To Set Up Your Tent
–Select a level campsite clear of rocks, branches and
other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, position the end
of tent into the wind.
–See owners manual for more tips.
Instructions apply to Part Number 9280A108
illus. 1
illus. 2
illus. 3
illus. 4
Tent Frame Part No. 9280-103
Rainfly Part No. 9280A101
POLE ASSEMBLY PARTS
illus. 5
Pin & ring system
illus. 6
Stake
corners through the
pin & ring system