Coleman 5461 SERIES, Instructions For Use Manual

Page: 6 / 12

5
To Turn Off
To Clean
Make sure stove and griddle (if equipped)
are cool. Move stove away from flame
(including pilot lights) and other
ignition sources.
Remove propane cylinder from
regulator and replace protective cap
on cylinder. (Fig. 17)
Remove regulator from stove. (Fig. 18)
MAINTENANCE
• Keep stove area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
• Do not obstruct the flow of
combustion and ventilation air.
• A good flame should be blue with
minimal yellow tip. Some yellow tips
on flames are acceptable as long as
no carbon or soot deposits appear.
• Wipe stove and stove griddle (if
equipped) clean with a soft cloth
and mild dish detergent. Do not use
abrasives. (Fig. 21)
To check if the gas cylinder is
empty, disconnect the cylinder
from the appliance and shake
from side to side. If there is no
sound or movement of liquid, the
cylinder is empty.
Annual service by an authorised
person is recommended. Or if
any of the following conditions
are noticed; incomplete ignition,
appreciable yellow tipping, carbon
deposition, lifting, floating, lighting
back or objectionable odor.
DO NOT use this appliance if
it has damaged or worn seals.
DO NOT use this appliance if it
is leaking, damaged or does not
operate properly.
Lift off
griddle and
pot support.
(Fig. 19 and
Fig. 20)
NOTE: The
griddle is
optional.
INSTASTART™
Electronic Ignition Stove
Set on sturdy,
flat surface. For
outdoor
use only.
Open burner
valve and
repeatedly
push igniter
button until
burner
lights.
(Fig. 13 and
Fig. 14)
NOTE: If igniter
fails to light
stove, use
match to light
burner. If the
stove is wet the igniter may not spark.
Adjust flame
with burner
valve.
(Fig. 15)
Flame
should be
blue with
a hint of
yellow
on tips.
Close both
burner
valves firmly.
(Fig. 16)
Fig. 21
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 18 Fig. 17
Fig. 19
Fig. 20