
3 Required
Large Screw
View from inside
looking upward.
4
Assembly
cont.
■
Place collar ring in position as
shown.
Step 3
■
Load fire pan assembly.
■
Install 3 Phillips Head screws
through support ring in location
shown. Tighten screws.
Step 1
(cont)
■
Install two cover pieces to base.
5 Required
■
Unit is now ready for final
assembly.
Large Screw
■
Install log center piece.
■
Logs are marked A, B, C, D, E, which match markings on log support
ring.
■
Install log support ring so that
“A” is to the front of the unit
(Control Panel side).
Step 4
A
B
C
D
E
■
Notches in Support Ring must
match Electrodes on Burner.
Notches
Electrodes
Burner
NOTE: Make sure no wires are
pinched between fire pan and
support ring.
Fire Pan
Support
Ring
Step 2
■
Install top support ring between
cover and support brackets.
3 Required
Large Screw