background image

5

6

IMPORTANT PRECAUTIONS – READ FIRST

   WARNINGS

When using this product, basic precautions should always be followed: 

•  Read all the instructions before using the product.
•  Water spray must never be directed toward any electric wiring, devices or directly 

toward the pressure washer machine itself, or fatal electric shock may occur.

•  To reduce the risk of injury, do not operate the machine near children.
•  Learn how to stop the machine and release pressure quickly. Be thoroughly familiar 

with the controls.

•  Stay alert—watch what you are doing.
•  For use with cold water supply only. Do not draw other liquids.
•  The pressure washer should not be used in areas where gas vapours may be present. 

An electric spark could cause an explosion or fire.

•  To minimize the amount of water getting into the pressure washer, the unit should be 

placed as far as possible from the cleaning site during operation.

•  Avoid accidental starts. Shut power “OFF” before connecting or disconnecting cord to 

electrical outlets.

•  Do not operate the product when fatigued or under the influence of alcohol or drugs.
•  Do not stand on unstable surfaces. Stand with both feet balanced at all times.
•  Prior to starting the pressure washer in cold weather, be sure ice has not formed on 

any part of the equipment.

•  Never carry your pressure washer by the cord. 
•  Do not pull on the cord to disconnect from the outlet.
•  To allow free air circulation, the pressure washer should not be covered during 

operation.

•  Keep operating area clear of people and pets.
•  Follow the maintenance instructions specified in the manual.

If replacement of the plug or cord is needed, use only identical replacement parts.
•  This product or its power cord contains lead, a chemical known to cause cancer, birth 

defects or other reproductive harm. Wash hands after use.

   WARNINGS

• Do not use with flammable liquids and toxic chemicals.
• Injection Hazard: Equipment can cause serious injury if the spray penetrates the skin.
• Do not point the gun at anyone or any part of the body. In case of penetration, seek 

medical aid immediately.

• This system is capable of producing high pressure as rated in the Technical 

Specifications. To avoid rupture and injury, do not operate this machine with 
components rated  less than the unit itself (including but not limited to spray guns, 
hose and hose connections).

• Before servicing, cleaning or removal of any parts, shut “OFF” power and  

relieve pressure.

• Do not spray electrical apparatus and wiring. 
• If connection is made to a portable water system, the system must be protected 

against backflow.

SAVE THESE INSTRUCTIONS

In a double-insulation product, two systems of insulation are provided instead 
of grounding. No grounding is provided on a double-insulated product, nor 
should a means for grounding be added to the product. Servicing a double-
insulated product requires extreme care and knowledge of the system, and 
should be done only by qualified service personnel. 

Replacement parts of a double-insulated product must be identical to the 
parts they replace. A double-insulated product is marked with the words 
“DOUBLE INSULATION” or “DOUBLE INSULATED”.  The symbol “    ” may 
also be marked on the product.

IMPORTANT PRECAUTIONS – READ FIRST

WARNING - Risk of Injury 

Do Not Direct Discharge Stream at Persons.
• High-pressure jet can be dangerous if misused.
• The jet must not be directed at persons, animals, electrical devices,  

or the unit itself.

WARNING - Risk of Explosion 

• Do not spray flammable liquids.
• Do not use acids and solvents in this product.
• These products can cause physical injuries to the operator and irreversible 

damage to the machine.

CAUTION - Gun Kicks Back 

• Hold with both hands.
• The trigger gun safety lock prevents the trigger from being engaged 

accidentally. 

•  The safety feature DOES NOT lock trigger in the ON position.

WARNING - Risk of Electric Shock

• Inspect cord before using - do not use if cord is damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
• Do not use extension cords longer than 50’ (15.2 m). Only use 12 or 14 AWG 

rated extension cords.

Summary of Contents for 300102












Reviews: