Chain
Chain and sprocket
inspection
Inspect the drive chain for wear,
rust, bound links, proper lubrication
and proper tension.
If the drive chain has a problem
correct or replace. Contact a service
center for chain replacement.
A worn drive chain could also mean
the sprockets may be worn.
Look for the following on the
sprockets (1): Worn teeth broken
or damaged teeth, loose sprocket
mounting nuts.
If the sprocket shows signs of wear,
contact a service center for replace-
ment.
5 - 15mm
(0.2 - 0.6in)
Chain tension
Check the tension of the chain , The
chain (1) tension should be
5 - 15mm (0.2 - 0.6in)
Chain tension (slack)
adjustment
1. Loosen the Rear axle bolt (2)
2. Adjust chain tension by turning
the tensioner nuts (one on each
side of dirt bike) (3). Clockwise will
tighten the chain. Counter clock-
wise will loosen the chain.
3. Once the chain is at the correct
tensionre-tighten Axle bolt (2).
4. Re-check chain tension.
1
Lubricating the chain before each
ride will help to ensure maximum
life of the chain and sprockets.
Instructions for cleaning
and chain lubrication:
1. Clean chain with water and allow
to dry.
2. Lubricate chain with chain lube.
Chain lubrication
2
3
NOTE: Adjusting the chain tension
will affect the rear braking. Always
check rear brake performance and
adjust as necessary before riding.
MAINTENANCE
27
