World Class Manufacturing in Car Wash Equipment
SUPER VAC 3 Installation/Operation Manual
Coleman Hanna Carwash Systems 93000/94000 Super Vac
Page 8 of 38 Rev. 2 7/12/10
There are two buttons located on the back of the timer that are used for setting the price and time, as
well as retrieving information.
When you first receive your timer and power it up, the display will be flashing zeros. This indicates that
the timer needs to be programmed to function properly. The following menus indicate the information
that will need to be input to make the timer function properly.
Let’s start by explaining the purpose of each menu.
MENUS FOR VACUUM
Menu
Valid Entries
A. Number of Coins to Start Vacuum
Valid entries are from 1 to 20 coins to start the vacuum
B. Number of Seconds per Vacuum
This menu creates some confusion for customers. TYPICALLY THIS
NUMBER IS LEFT AT ZERO. The menu is in place for those customers who
have a wash that starts at 3:30, for example. In this case, you would enter the
:30 at this point. Valid entries are from :00 to :59.
C. Number of Minutes Per Vacuum
Valid entries are from 0 to 9.
D. Number of Times Warning Horn
Beeps
This is the number of times the user would like the warning horn to sound at
the one-minute mark. Valid entries are from :00 to :59. If the menu is left at
:00, the warning horn is disabled.
H. Amount of Time per Coin After
the Start-Up Price is Satisfied.
This is the amount of time that the customer will receive for each additional
coin deposited after the initial turn-on price is deposited.
6.1 Initial Setup of New Timers
6.2 Menus
Mode
Set
6. EQUIPMENT PROGRAMMING