DO NOT LET MONTO OVERHANG THE DESK EDGE
Risk of Monto falling from surface and causing injury.
CAUTION - WORKING LOAD
7KG/15LB
DO NOT OVERLOAD THE RISER WITH HEAVY OBJECTS
DO NOT STAND, SIT OR LEAN ON MONTO
Risk of Monto collapsing under excess weight load
Monto’s front edge must
NOT overhang the front
edge of the work surface.
Risk of Monto falling
from surface.
7KG/15LB
IMPORTANT - SAFETY CONSIDERATIONS
1
W A R N I N G
Do not place Monto upside-down or activate the legs
unless the unit is placed on all 4 feet, because serious
injury may occur.
Please review the adjustment instructions in Section 3 of
this document before attempting to activate Monto’s legs.
2
Some important precautions
I M P O R T A N T
•
Monto is intended for general purpose desktop use. It is not
intended for heavy-duty applications.
•
Do not lean heavily on the front of Monto’s platform.
•
Do not stand on Monto.
•
Do not mount monitors directly to Monto. Monitors should
be independently mounted to the work surface using a
suitable monitor arm.
•
Maximum weight of supported equipment on Monto’s
platform not to exceed 7kg.
•
Please follow the installation instructions carefully. Correct
installation is essential to the safe and reliable operation of
the Monto Sit Stand Riser.
•
Please take care to avoid trapping fingers when installing or
adjusting the product.
•
Ensure that the work surface upon which Monto is installed
is strong enough and stable enough to support the product
and any supplementary equipment such as monitor arms and
monitors.
•
Ensure that the surface upon which Monto is being installed
is large enough to accommodate the product throughout its
full range of adjustment. In particular ensure that Monto is
positioned such that it does not overhang the front of the
work surface and is never in danger of ‘toppling’ from the
surface.
•
It is the user’s responsibility to ensure that Monto and
any associated monitor mounts are installed using fixings
appropriate to the surface or structure to which it is being
mounted.
•
Do not install Monto outdoors or in environments where it
will be directly exposed to moisture. Do not install it in harsh
or corrosive environments.
•
Do not use this product for any purpose other than that for
which it was designed.
•
Keep out of the reach of children. Monto is not a toy.
•
Do not leave Monto unattended around children.
E L E C T R I C A L S A F E T Y
•
Safe installation of electrical equipment and electronic devices is the
responsibility of the user.
•
Please take care to avoid trapping cables when installing or adjusting the
product.
M A I N T E N A N C E A N D I N S P E C T I O N
•
Ensure all screws and fi xings are fully tightened and occasionally re-tighten if
necessary.
•
Clean the product with a damp cloth. DO NOT use solvents.
•
If Monto leaves marks on the surface upon which it is installed, clean them off with a
damp cloth.
D I S C L A I M E R
As part of Colebrook Bosson Saunders ongoing product improvement
programme, the design of products may change without prior notice and
details may vary from those illustrated.
Colebrook Bosson Saunders hold a number of patents and other
intellectual property rights covering our products and processes. You
can find patent information on our website at:
www.colebrookbossonsaunders.com/patents
P A T E N T S