6
5.1 SELECT TUBING AND PUMP
HEADS
Use Table 1 (See below) to select the tubing to provide the
required single channel flow rate.
See Appendix B (Page 8) for ordering information on the
MASTERFLEX Two-Stop Pump Tube Sets.
5.2 SELECT PUMP SPEED
Select fixed speed drive or adjust speed of variable-speed
drive to provide desired nominal flow rate within the rpm
speed range shown for the pump model selected.
6. MAINTENANCE
No maintenance is required. Wipe the Pump Head with a
clean cloth and a mild detergent to clean. Never immerse or
use excessive fluid.
6.1 SERVICE PARTS
Hex Key (9/64-in. hex)
Model 07534-04, 07535-04, 07536-02
A-3502
Model 07534-08, 07535-08, 07536-04
A-4376
Mounting Screws
B-1079-0515
Support Foot
A-4128-0005
Table 1 — Flow rates
Pump Tubing Tubing
Drive RPM
Flow Rate per
Models
Type
Size
Channel in ml/min
0.19 mm ID
1 to 100
0.0026 to .26
6 to 600
Not recommended*
0.25 mm ID
1 to 100
0.0053 to .53
6 to 600
Not recommended*
0.89 mm ID
1 to 100
0.054 to 5.4
07534-04
Microbore
6 to 600
0.30 to 30
07534-08
1.42 mm ID
1 to 100
0.12 to 12
6 to 600
0.67 to 67
2.06 mm ID
1 to 100
0.23 to 23
6 to 600
1.25 to 125
2.79 mm ID
1 to 100
0.35 to 35
6 to 600
2.0 to 200
L/S
®
13
1 to 100
0.045 to 4.5
6 to 600
0.27 to 27
07535-04
L/S
®
14
1 to 100
0.16 to 16
07535-08
L/S
®
Precision
6 to 600
0.96 to 96
L/S
®
16
1 to 100
0.47 to 47
6 to 600
2.8 to 280
L/S
®
15
1 to 100
1.6 to 160
6 to 600
10 to 1000
07536-02
L /S
®
High
L/S
®
24
1 to 100
2.8 to 280
07536-04
Performance
6 to 600
17 to 1700
Precision
L/S
®
35
1 to 100
3.8 to 380
6 to 600
23 to 2300
* Not recommended to use these tubing sizes at speeds greater than 300 rpm.
