INTRODUCTION
The Console Drive controls the speed of MASTERFLEX
®
I/P
®
Pump Heads to provide flow rates from 0.12 to
17 L/min, or 26 L/min with two pump heads.
Mount up to 2 MASTERFLEX
®
I/P
®
EASY-LOAD
®
or Standard Pump Heads or 1 MASTERFLEX High-Performance
I/P
®
Pump Head.
CONTROL/DISPLAY FUNCTIONS
Press keys to activate function. Use UP/DOWN (
▲
,
▼
) arrow keys to correct/change a flashing display.
Press any key to enter new values.
A. DOWN ARROW (DECREMENT)—Decrease value of a flashing display.
B. UP ARROW (INCREMENT)—Increase value of a flashing display.
C. FLOW CONTROL—Set flow rate for selected tubing size. To change flow rate, press
▲
or
▼
arrows. (If pump is
running, its speed will change with new settings.)
D. TOTAL VOLUME—Display cumulative dispensed volume.
E. START/STOP—Start/Stop motor.
F. PRIME—Run pump at full speed to fill or clear lines.
G. DIRECTION—To change motor direction.
H. MODE SELECT—INTERNAL for internal control; mA for remote current control; V for remote voltage control.
I. DISPENSE/COPY—Select dispensed volume, number of copies of a dispensed volume, or the dispense interval.
J. CAL CONTROL—Refine built-in calibration using a measured volume.
K. TUBING SELECT—Select tubing size.
1
H
D
K
I
E
J
C
G
F
B
A
Summary of Contents for MasterFlex I/P 77420-00
