![Cole Parmer Masterflex 07591-20 Operating Manual Download Page 3](http://html1.mh-extra.com/html/cole-parmer/masterflex-07591-20/masterflex-07591-20_operating-manual_2635339003.webp)
DANGER
S
:
Remove power from the pump before any
cleaning operation is started.
High voltages exist and are accessible. Use extreme caution
when servicing internal components.
WARNINGS: Remove power from the pump before attempt-
ing any maintenance.
A contactor or other device that routinely disconnects and
reapplies the AC line to the drive to start and stop the motor can
cause drive hardware damage. The drive is designed to use
control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from
pump. Use appropriate measures to protect operator and equipment.
Turn Pump System off before removing or installing tubing.
Fingers or loose clothing could get caught in drive mechanism.
CAUTIONS: When changing flow direction, allow the pump to
come to a complete stop before starting again. Failure to do
so could cause permanent damage to the motor.
Replace the fuse only with one of the same type and rating.
The fuse rating and type are stated on the rear panel.
CAUTION: To avoid electrical shock, the power cord
protective grounding conductor must be connected to ground.
Not for operation in wet locations as defined by EN61010-1.
If the product is not used in a manner specified in the instruc-
tions, the protection provided by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature
of hazard and corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while
pump is in operation. Stop pump before loading or unloading tubing.
CAUTION: Hot Surface. Do not touch.
CAUTION: Risk of electric shock. Consult Operator’s manual for
nature of hazard and corrective actions.
This product is not designed for, nor intended for use in
patient connected applications; including, but not limited to,
medical and dental use, and accordingly has not been
submitted for FDA approval.
This product is not designed for, nor intended for use in
hazardous duty areas as defined by ATEX or the NEC (National
Electrical Code); including, but not limited to use with
flammable liquids.
Cole-Parmer
I/P Precision Variable-Speed Modular Drives Operating Manual iii
Preface
Safety Precautions
SAFETY
PRECAUTIONS
Explanation of
Symbols
WARNING:
Product Use
Limitation