background image

4 \ USER OPERATION MANUAL: 

Cole-Parmer Basic Ductless Fume Hood Series

 

 

 

 

 

Warranty

 

The manufacturer agrees to correct for the original user of the product, either by repair (using new or refurbished parts), or 
at the manufacturer’s election, by replacement (with a new or refurbished product), any defects in material or workmanship 
which develop during the warranty period. The standard warranty is twelve (12) months after delivery of the product for Non-
Consumable and Electrical parts, excluding Filters and other Consumables. In the event of replacement, the replacement 
unit will be warranted for the remainder of the original warranty period or ninety (90) days, whichever is longer. For purposes 
of this limited warranty, “refurbished” means a product or part that has been returned to its original specifications. In the 
event of a defect, these are your exclusive remedies. 

 

 

If the product should require service, contact the manufacturer’s/supplier’s office for instructions. When return of the product 
is necessary, a return authorization number is assigned and the product should be shipped, transportation charges pre-paid, 
in either its original packaging or packaging affording an equal degree of protection to the indicated service center. To 
ensure 
prompt handling, the return authorization number must be placed on the outside of the package. A detailed explanation of 
the defect should be enclosed with the item. The warranty shall not apply if the defect or malfunction was caused by 
accident, neglect, unreasonable use, improper service, acts of God, modification by any party other than Cole-Parmer, or 
other causes not arising out of defects in material or workmanship.  
 
EXCLUSION OF IMPLIED WARRANTIES. THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, 
BUT NOT LIMITED TO, THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH 
EXTEND BEYOND THE DESCRIPTION AND 

PERIOD AS STATED IN THE OPERATOR’S MANUAL INCLUDED WITH 

EACH PRODUCT. LIMITATION ON DAMAGES. 

THE MANUFACTURER’S SOLE OBLIGATION UNDER THE WARRANTY 

IS LIMITED TO THE REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT AND THE MANUFACTURER SHALL 
NOT, IN ANY EVENT, BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND RESULTING 
FROM USE OR POSSESSION OF THIS PRODUCT. 
 
Some states do not allow: (A) limitations on how long an implied warranty lasts; or (B) the exclusion or limitation of 
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you 
specific legal rights and you may have 

other rights that vary from state to state. 

 

 

 

Summary of Contents for 78900-00





























Reviews: