background image

4

Care and Maintenance

The servicing instructions here are intended for limited maintenance. Do not perform  

any servicing other than that contained in the instructions. Return product to factory for  

maintenance not covered in this section. Maintenance should only be undertaken by a  

qualified electrician

1.  Housing and Filter Maintenance

The plastic housing is designed for protecting the internal parts and facilitates handling. Make 

sure no liquids come into contact with the electrical components. Clean the filter with a glass 

cleaner and soft cloth.

2.  Tube and Reflector Maintenance

Refer to the following instruction in the “Tube Replacement” section below and remove tubes 

before cleaning. Glass cleaner may be used for cleaning the reflector and a mild detergent 

may be used for cleaning the tube. Wipe and dry with soft cloth.

3.  Tube Replacement 

(tube type TUV 6W)

When the product fails to operate correctly, check with above operating instructions first.  

If the problem persists and tube replacement is deemed necessary, proceed as follows:
1. Turn the power switch to OFF position and unplug the power cable from electrical outlet.
2.  Lay the UV lamp housing on a flat table.
3.  Remove the 8 screws at the filter’s side of the plastic housing. Separate the top and  

bottom housing parts.

Always unplug the product from its power source before cleaning or servicing.

WARNING

Operating Instructions

1. Connecting Power Supply

 

Refer to Specifications on page 6.

2. Turn ON the Unit

 

For Models with Single wavelength: Press power switch to position “I”.

 

 For Models with Dual Wavelength: Select desired wavelength by pressing the select 

switch at right. Press power switch to position “I”.

 

Note:

 The intensity of the radiation might be weak initially while the lamp tube is cold.

3. Turn Off

 

Press power switch to position “O”.

4. Charging Battery for 12 VDC Models

 

 Each 12 VDC operated model contains a lithium battery pack. The battery needs to be 

charged when the yellow status light is on. Please use the charger which comes with the 

product.

Summary of Contents for 09818-05









Reviews: