Coldair GCPF160, Operating Instructions Manual

Page: 6 / 12

WARNING: The fan should not be connected to the power mains during assembly
Assembly
•
Place the Base Feet (F) together so they form the Cross Base and place the Outer stand
pole (D) upon the Base feet and fix it with the 4 screws (E) provided.
•
Loosen and remove the height adjustment lock (B) and place the base cover (C) over the
Outer stand pole (D).
•
Let the Base cover (C) slide over the mounted feet.
•
Attached the caps (G) to the base feet (F) if not already mounted.
•
Pull the upper pole out of the lower stand pole (D) and slide the height adjustment ring (B)
over the inner pipe onto lower stand pole (D) and tighten.
A Direction of rotation
B Height adjustment lock
C Base cover
D Outer stand pole
E 4 screws
F Base Feet
G Caps