6
Cautions and Warnings
Please review the following cautions and warnings before operating or performing maintenance on
the machine.
WARNING
All persons who will be operating or will be in the vicinity of the Abrasive
Blaster during its operation must receive proper training on how to safely
operate the equipment and be informed of the potential hazards involved. In
addition to proper training, all persons who will be operating or will be in the
vicinity of the Abrasive Blaster during its operation must read, understand,
and follow all procedures described in the operator manual. For replacement
manuals, please contact your distributor or visit www.coldjet.com.
WARNING
Respiratory protection is mandatory for all persons operating or located in the
vicinity of the Abrasive Blaster. Follow all OSHA and NIOSH requirements for
breathing equipment and supplied air standards.
.
WARNING
Pressurized Vessels contain large amounts of stored energy and can cause
severe injury or death if safety procedures are not followed.
NEVER
perform
maintenance or attempt to open a Pressure Vessel for any reason while it
is Pressurized.
ALWAYS
Depressurize and properly disconnect equipment
from its air source before performing any maintenance. Do not modify, grind
or weld on the pressure vessel for any reason. Doing so will void the ASME
certification. Do not use damaged pressure vessels.
WARNING
The use of proper remote control systems (commonly referred to as Deadman
controls) are required when using abrasive blasters.
NEVER
operate the
Abrasive Blaster without remote controls.
NEVER
use bleeder type control
handles, such as Clemco® or A-BEC® style handles, with the abrasive blaster
as they can cause a hazardous situation where the blaster will not shut off
when the handle is released.
WARNING
All persons who will be operating or will be in the vicinity of the Abrasive
Blaster during its operation must protect themselves with the proper Personal
Protective Equipment (PPE) and use of common sense. Personal Protective
Equipment (PPE) including but not limited to Hearing, Eye, Body and Lung
protection are required. The Abrasive Blaster and the objects being blasted
can be heavy and can lead to severe injury or death if they fall over.
ALWAYS
follow all safety requirements of OSHA and NIOSH.
Summary of Contents for E-CO2 150
