Cold Jet Aero 40 HP, Operator'S Manual

Page: 19 / 31

19
19
Shut Down
Stop blasting and disable the Applicator Safety by pushing
the switch, located on the applicator handle, back to the (O)
position.
1
2
Turn OFF the compressed air supply.
3
Turn OFF the Power Switch.
4
Open the bleed valve to relieve all remaining pressure.
5
If open, close the ill lid.
6
When the air hose is fully depressurized disconnect the
machine.
When shutting the machine down for more than 15
minutes, always make sure the hopper is empty and blast
with air only for 1 minute. Failure to do so may result in
feeder and/or nozzle freeze-up.
*
Stop blasting and push in the Disable Blast Button on the
Control Panel.
Remove unused ice from the hopper.
Pull out the Disable Blast Button on the Control Panel.
Flip the Air/Ice Control Switch on the Applicator to Air Only
(I) and blast for 1 minute.
7
8
9
10