COLASIT AG
Plastic construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
Editione 2010 / Subject of alteration
Copyright by COLASIT AG Spiez
Page 4
Part 1: General
1 General
OBLIGATIONS
Prior to any work done on or with the fan, we put you under an obligation to read
this operating manual and any further contractors’ operating instructions carefully
and through to the end.
Should anything not be clear, please get in touch with us immediately. Do not put
the fan into operation as long as uncertainties exist.
With the commissioning of the fan you confirm that you have read and
understood the operating manual.
After having become acquainted with the fan and its operational performance
together with your production process, we recommend that you make a note of
the different modes of operation in a “process instructions” document.
Together with this operating manual, any acceptance documents such as ATEX, works acceptance
certificates and the EC declaration of conformity, the process instructions document forms part of the
complete system documentation.
For the fan, a separate risk analysis was made as a prerequisite for writing this operating manual.
Risks were evaluated and any remaining residual risks are pointed out in this operating manual.
1.1 Definition
The term "COLASIT fan" stands for a Swiss high-quality product and contains all those components and
individual parts, as compiled in the purchase order or in the material parts list respectively, which, when
assembled, form a functional unit.
1.2
Manufacture of COLASIT fans
The fan was manufactured using to modern manufacturing methods and was extensively tested both during
manufacture and as a finished product by the COLASIT quality assurance system. The methods and
procedures used for manufacture and production monitoring correspond to the state of the art. The
personnel entrusted with the manufacture of the fan have the appropriate skills and possess valid
qualifications.
All fans complete a successful test run in the manufacturer’s facilities.
1.3 Warranty
The warranty ends on the date stated in the general terms of sale and delivery. Warranty is limited to the
delivery of spare parts or the repair of defective parts in the manufacturer’s works. Any further claims or the
replacement of expendable items or of items subject to normal wear and tear are excluded.
We guarantee the availability of spare parts identical in construction to the original over a period of 10 years
effective from the date of delivery.
COLASIT only guarantees the stability of materials under the condition that technological data was available
before production.
Any change in the conditions of use is only permissible after approval by COLASIT; otherwise this entails the
loss of warranty.
Any changes or repair work during the warranty period may only be made by our fitters or with our written
consent.
We refer to the limitation of warranty noted in the “drive“section in the case where a frequency converter
supplied by a third party is used.