14
CHASSIS
HARNESS
MAIN
FRAME
CHASSIS
CHASSIS
MAIN FRAME
NUTS
STATIC GROUNDING
SPRING
SNACK
MASK
MOUNTING
FRAME
MAIN FRAME
STATIC GROUNDING
SPRING
MOUNTING
FRAME
BOTTLER
MASK
SECTION 4: MAINTENANCE
Removing the Inlet Mask
(see Figure 8 or 9)
Using a Phillips screwdriver, remove the three screws
that secure the mask to the mounting frame.
Removing the Mounting Frame and Static
Grounding Spring (see Figure 8 or 9)
Using a Phillips screwdriver, remove the screws that
attach the mounting plate and grounding spring to the
main frame.
Removing the Chassis from the Main-
frame (see Figure 10)
Remove the phillips screw securing the chassis to the
main frame. Remove the web wrap from the chassis
harness. Spread the main frame apart to release the two
locating pins of the chassis from the main frame then pull
down on the chassis. Carefully feed the chassis harness
through the opening in the main frame. Pull the chassis
out through the lower main frame opening.
Figure 8
MAG50B/MAG52B
Figure 9
MAG50SA/MAG52SA/
MAG50BAB
Figure 10
Summary of Contents for MAG50B
Page 1: ...MAG BILL ACCEPTOR Operation and Service Manual...
Page 2: ......
