Revision Date: 3/2/2022
6
Install Sheet 7267
SKU: 110-0910
8.
Mark the service perch in the 3 locations shown in Figure 5 with the lower horizontal line 1/2 inch above the brake
line bracket mounting hole. Tie up any hoses and wires so they are clear of the cutting area and cut the service
perch along the marked lines.
•
NOTE:
Take great care to keep the lines and wires safe during the cut and make sure to shield them from sparks
if any kind of grinder is used.
Wear safety glasses.
Exposed raw metal should be coated or painted to prevent corrosion.
9.
Reinstall the removed brake line bracket to the service perch, Torque the bolt to
22 ft-lbs.
10.
Reinstall the lower brake line bracket, Torque the bolt to
22 ft-lbs.
11.
Reinstall the wheel speed sensor, Torque the bolt to
72
in-lbs
.
Figure 5: Mark and Cut Service Perch
