CognitiveTPG A776 ColorPOS, Programming Manual

Page: 88 / 180

Chapter 5: Programming commands 76
A776 (B780) Programming Guide A776-PG00001 D 07/13
Transmit printer ID
ASCII
GS I n
Hexadecimal 1D 49 n
Decimal
29 73 n
Value of n: 1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo Definition
Transmits the printer ID specified by n as follows:
n Printer ID Specification ID (Hexadecimal)
1, 49 Printer model ID CognitiveTPG A776 0x2B (A776)
0x2A (A760)
0x2C (B780)
2, 50 Type ID Installed options Refer to the table below
3, 51 ROM version ID ROM version 0x00
4, 52 Logo definition Logo definition Refer to table
next column
n = 2 or 50: Type ID
Type ID ( n = 2)
Bit Off/On Hex Decimal Function
0 Off 00 0 No two-byte character
code installed.
On 01 1 Two-byte character
code installed.
1 Off 00 0 No knife installed.
On 02 2 Knife installed.
2 - - - Undefined.
3 Off 00 0 No MICR installed.
On 08 8 MICR installed.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 No imager installed.
On 20 32 Imager installed.
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.
Continued . . .