10 Xpand 25 Quick Reference Guide
Xpand 25 Quick Reference Guide 11
Assembly Instructions
1
Attach the FOVE-bracket to the Xpand 25 enclosure using four
M4x10 mm flat head cap screws, and then attach the M3x25 mm
flat head cap screw to the FOVE-bracket using an M3 hex nut.
1
3
4
2
Tighten in sequence. Torque limit: 90 N-cm (8 Lb-In).
The steps below highlight the main steps of assembling your Xpand 25:
Assembly Overview
Reader
25 mm c-mount lens 35 mm c-mount lens
DM503
ü
Optical Setup
The recommended apperture size is F:8
i
The following lenses can be used with Xpand 25:
1. Attach the FOVE-bracket to the FOVE.
2. Mount the camera lens to the reader, using the steps provided in
the quick reference guide for your reader.
3. Attach the reader to the FOVE-bracket.
4. Attach the bar light(s) to the FOVE.
5. Connect the light to the reader.
6. Connect your assembly to the Setup tool.
7. Set focus.
8. Close sliding lens cover.
