Connect the Light Cable (Optional)
Tip
: The space between the vision system connectors is limited; it is recommended to first connect the Light cable to
ensure enough space for the connection of the Ethernet cable and Breakout cable.
1. Remove the protective cap from the LIGHT connector, if present.
2. Connect the Light cable’s M12 connector to the vision system's LIGHT connector.
3. Connect the other end of the Light cable to an external lighting device (for example, a strobe light). For more
information, refer to the
.
Connect the Ethernet Cable
1. Connect the Ethernet cable's M12 connector to the vision system ENET connector.
2. Connect the Ethernet cable’s RJ-45 connector to a switch/router or PC, as applicable.
20
Installation
