Breakout Cable Specifications
The Breakout cable provides connection to an external power supply, RS-232 serial communications, acquisition trigger
input, high-speed outputs and encoder inputs (In-Sight 5604 only). The Breakout cable is not terminated. When using the
In-Sight 5604, refer to
Encoder Inputs (In-Sight 5604 Only)
Pin#
Signal Name
Wire Color
1
+24VDC
White/Green
2
Green
3
TRIGGER-
White/Orange
4
HS OUT 0
Blue
5
HS OUT 1
White/Blue
6
RS-232 RECEIVE (RxD)
1
(In-Sight 5604 Only: Encoder A)
Orange
7
RS-232 TRANSMIT (TxD)
2
(In-Sight 5604 Only: Encoder B)
White/Brown
8
24V COMMON
Brown
Note
:
l
Cables are sold separately.
l
Unused wires can be clipped short or tied back using a tie made of non-conductive material. Keep all bare
wires separated from the +24VDC wire.
l
The housing of the vision system is internally connected to the system ground wire (pin 8 of the Breakout
cable). Therefore, if the mounting surface of the vision system is at a non-zero ground potential, it is strongly
recommended that the vision system be mounted on an isolated or non-conductive mount.
1
If hardware handshaking is required, an I/O module must be used.
2
If hardware handshaking is required, an I/O module must be used.
30
Specifications
