background image

16  Deluxe I/O Box Quick Reference Guide

Deluxe I/O Box Quick Reference Guide   17

Weight

3.43 kg

Operating 

Temperature

0ºC — 45ºC (32ºF — 113ºF)

Storage Temperature

-10ºC — 60ºC (-14ºF — 140ºF)

Maximum Humidity

95% (non-condensing)

Environmental 

Protection 

IP54

Vibration

Up to 20G

Power Supply

110V to 240V AC

Input Voltage

24 DC (+/- 10%); 150 W

Operating current 

at 24V

6A

Specifications 

i

NOTE: For product support, contact http://support.cognex.com

CAUTION: IP protection is ensured only when all connectors are attached 

to cables or shielded by a sealing cap. 

Warnings and Notices

TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS INJURY

•  CAUTION - Use of controls or adjustments or performance of procedures other 

than those specified herein may result in hazardous radiation exposure.  

•  Do not attempt to service or repair this product -- return it to Cognex for 

service.  

•  Do not permit anyone other than Cognex Corporation to service, repair, or 

adjust this product. 

•  Do not attempt to open or modify this device except as described in this 

document.

•  Do not operate this device if it is damaged or if the covers or seals are missing 

or damaged. 

 FAILURE 

Summary of Contents for Deluxe I/O Box












Reviews: