Connection Options
Connecting a DataMan 8072Through Ethernet
1. Connect the Ethernet slide-in (DMCM-ENETM-00) to your DataMan 8072.
2. With a 2.5 mm Allen wrench, tighten the screws so that the slide-in is firmly locked.
3. Insert the plug and slide the cable lock up to the reader, and twist the cable lock in place.
Use the DM8000-ECABLE-05 (5 meters) or the DM8000-ECABLE-30 (30 meters). You also need a Power Over Ethernet
Adapter (CPS-AC-POE1A-xx).
Note
: Disconnect the DataMan 8072 reader from power before inserting/removing communication modules.
14
Connection Options
