Setting Up Your DataMan 8072 DL
Setting Up the Reader
To be able to connect to your reader on your computer, you must perform the following steps:
1.
1.
Install the DataMan Setup Tool
on your computer.
2. Select the connection type: Ethernet or USB; and connect the appropriate cabling.
3. Power on your device(s).
Install the DataMan SetupTool
1. Check the DataMan
Release Notes
for a full list of system requirements.
2. Download the DataMan Setup Tool from
http://www.cognex.com/support/dataman
and follow the on-screen
steps.
3. Connect the DataMan 8072 to your PC.
4. Launch the DataMan Setup Tool and click
Refresh
. The reader or the base station appears under
COM ports
or
Network devices
.
11
Setting Up Your DataMan 8072 DL
