Cognex DataMan 280 Series, Quick Reference Manual

Page: 27 / 41

Installing a C-Mount Lens
1. Unscrew the four M2x12mm Phillips Pan head screws, then take off the
metal cover from the reader.
2. Remove the illumination module.
3. Unscrew the two M2x5mm Phillips head screws, remove the 6.2 mm lens
mount and the 6.2 mm lens.
4. Place the C-Mount adapter on the front of the device, and tighten the
screws.
5. Place the lens cover adapter plate on the C-Mount adapter, and tighten the
screws.
6. Thread the lens into the reader.
7. Screw the lens cover onto the lens cover adapter.
27