Preface
This document describes the Cognex CFG-8700 series frame grabbers.
Symbols
The following symbols indicate safety precautions and supplemental information.
WARNING
:
This symbol indicates the presence of a hazard that could result in death, serious personal injury or
electrical shock.
CAUTION
:
This symbol indicates the presence of a hazard that could result in property damage.
Note
: Notes provide supplemental information about a subject.
Tip
: Tips provide helpful suggestions and shortcuts that may not otherwise be apparent.
Precautions
Observe these precautions when installing the Cognex product, to reduce the risk of injury or equipment damage:
l
To reduce the risk of damage or malfunction due to over-voltage, line noise, electrostatic discharge (ESD), power
surges, or other irregularities in the power supply, route all cables and wires away from high-voltage power
sources.
l
Changes or modifications not expressly approved by the party responsible for regulatory compliance could void
the user’s authority to operate the equipment.
l
Cable shielding can be degraded or cables can be damaged or wear out more quickly if a service loop or bend
radius is tighter than 10X the cable diameter. The bend radius must be at least six inches from the connector.
l
Class A Equipment (broadcasting and communication equipment for office work): Seller and user shall be
notified that this equipment is suitable for electromagnetic equipment for office work (Class A) and can be used
outside the home.
l
This device should be used in accordance with the instructions in this manual.
l
All specifications are for reference purpose only and may be changed without notice.
3
Preface
