13. Demolition/Disposal
When the machine is no more in use, it is recommended that it be made inoperantive by unplugging the machine and cutting the electrical
cord. The machine must be sold off through authorized organizations/ companies as per the
European Directives 2002/96/C.
14. Problems & Solutions
In case should incur problems as per below list which are preceded by the symbol in the solutions section
it is absolutely necessary to contact a
specialized technician.
-
In case of any other problem not reported in the above list contact a specialized technician.
Problem
Cause
Solution
The main switch (lighted switch) is not set to
The machine is not plugged
Electric cable defective
Set to the switch
Replace the electric cable
Insert the plug
The main switch (lighted switch) is defective
1
1
The switch is set to
A
1 -
Wrong setting of the thickness control
Machine with insufficient ventilation or nearby a heat source
Leaking of refrigerant
The condenser i dirty
The micro-switch of the thickness control is defective
B
0
The switch is not set to
Set the switch
B
to
1 -
Set correctly the thickness control (see Fig. 9)
Restore and re-charge the cooling system
Clean the condenser (see Fig. 25-26-27)
Clean or replace the micro-switch
Set the switch
A
to
1 -
Spiral blade switch set to
B
0
Accumulations of iced product into the bowl
Spiral blade switch defective
B
1 -
Set the spiral blade switch to
B
1 -
Switch the machine OFF and wait until the ice melt
Replace the spiral blade switch
Insufficient lubrication
Lubricate correctly
Tap valve defective
Replace the tap valve
Tap valve not correctly lubricated
C
C
Lubricate correctly the tap valve
Accumulations of iced product into the bowl
Switch the machine OFF ans wait until the ice melt
24 -
UK
easicook.co.uk
Summary of Contents for Kream Line 1
Page 1: ...e a s i c o o k c o u k ...
Page 23: ...NOTE e a s i c o o k c o u k ...
