CoffeeB Globe, User Manual

Page: 30 / 32

30
Troubleshooting Remedial action
The control lever does not
move up automatically after
the brewing process
X
Pull the control lever up by
hand.
Attention! Do not move the
control lever upwards during
brewing, rinsing or descaling.
Incorrect coffee ball in the
brewing chamber
X
Push the coffee ball down
with your finger.
X
Remove the coffee ball.
If the coffee ball has not be-
come wet, it can still be used.
The coffee ball dispenser is
difficult to turn
X
Clean the coffee ball dis-
penser with rinsing water and
dry before first use.
The coffee machine makes
a humming noise during the
brewing process This noise is caused by solenoid
valves in the machine. This is
due to technical reasons and is
not a cause for concern.
Troubleshooting Remedial action
The coffee machine drips at
the beginning of the brewing
process Before starting the brewing pro-
cess, the coffee ball is wetted
with water. Depending on the
operating status, the coffee
machine drips before dispens-
ing the coffee. This is system-re-
lated and has no negative
effect on the coffee quality.
The rinsing water is milky when
it comes out of the coffee
machine The Crema valve in the coffee
machine produces small air
bubbles during the brewing
process. If the rinsing water
runs through the Crema valve
during the rinsing process, small
bubbles are also produced in
the rinsing water. These cause
the outflowing rinsing water to
look milky.
The water becomes completely
clear again after a short time,
as soon as all the bubbles have
escaped.