FILTERBREW & SERVING CONCEPT
10
PROGRAMMING
ADJUST
DISPLAY
+5°C
5
+4°C
4
+3°C
3
+2°C
2
+1°C
1
0
0
-1°C
-1
-2°C
-2
-3°C
-3
-4°C
-4
-5°C
-5
Cater
Adjusting of water temperature
Normal operation with reduced outlet time
Press buttons
and
at the same time for 5 seconds until you
hear one beep. Display shows the present setting
Adjust with the buttons
= (increase) and
= (decrease).
Confirm the new settings by pressing the
button.
70°
0
C = min. temperature.
96°
0
C = max. temperature.
This mode is entered by pressing the
and
before turning the
mains switch on. The buzzer gives a 5s beep to indicate this mode.
This machine operates like in normal mode but the outlet times are reduced by
90% in order to allow faster adjustment of valve times.
Adjusting of temperature sensor
In this mode a temperature offset for the NTC sensor can be adjusted.
The procedure to enter this mode is the following:
Press buttons
,
and
at the same time for 5
seconds until you hear 2 beeps.
The display shows the current setting.
Adjust with the buttons
= (increase) and
= (decrease).
Pressing the
button to save new settings and return to normal
mode.