4. SERVICE.
Installation and start
Excellence
1.
Place the machine on a flat level and waterproof surface.
2.
Assemble top cabinet and base cabinet with the enclosed screws M6 x 20.
M6 x 20
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
8
.
OBSERVE!
Make sure there is a space
behind the machine for free
flow of air.
( minimum 10cm ).
A
NOTE!
This installation part is only valid Freshbrew machine
Excellence with a chilled water function (with carbonic acid).
3a.
Apply
the enclosed 8mm hose (A)
(parallely),
between
the over cabinet and base cabinet, left to left a.s.o.
3pcs.
(See fig.1).
3b.
Valid for machine with chilled water unit.
Apply parallel
the enclosed 8mm hose (A) between the
over cabinet and base cabinet, left to left a.s.o.
2pcs.
NOTE!
Do not connect cable to the base cabinet
before
machine is warm. (this will take approximately 10 minutes).
Fig.1.
A
