15
Step 10: Reassemble the brewing system
REASSEMBLY PROCEDURE
Reinstall the steam trap and connect
the tubes.
Reinstall the brew chamber on top of
the brewer, making sure the studs snap
fulling into the holes in the arms.
Reinstall the coffee spout.
Reinstall the waste guides.
Reinstall the brewer, by hooking it on
the screw studs then snap the crank
into the nylon drive hub by pushing it
inward from the bottom.
Important!:
If the crankshaft must be rotated to align with the brewer motor drive gear, use the
brew mechanism rotating tool (article number: 4740132, shown to the right).
Never use pliers or other metal tools, since these can bend or damage the crankshaft
which will subsequently damage the nylon drive hub.
