(B)
12
.
Disassemble blender system. Cleaning once a day.
6. CLEANING:
Cleaning once a day
4. Loosen the mounting
plate.Turn the lever counter
clockwise (D) until it stops.
(C)
(A)
(D)
5. Clean with a damp
cloth and wipe dry.
6. Wash these parts
A. Mixing bowl
B. Steam trap
C. Mixer
D. Mounting plate
1.Turn the lever(A)
counter clockwise.
2. Loosen the blender cup
Pull straight out (B).
3. Loosen the mixer
(C) by pulling it
straight out.
Note:
All parts must be dry before being remounted.
Reassemble the blender system.
7. Replace the mounting plate
by turning the lever (E) clock-
wise.
CHECK
the washers.
(E)
8. The level side of the mixer motor
shaft should line up with the marking
on the mixer (F).
(F)
9. Mount the mixer, and press until you hear a clicking
sound. Follow the mixer's indicator,
arrow (G).
The mixer can only be mounted in this way.
(G)
10. Press in the blender cup
as shown (H) and lock
with the lever (I).
(H)
(I)
CHECK
CHECK
