ORIGINAL LINE A
19
Original instructions.
INSTALLATION AND START-UP
Positioning
Place the machine on a flat horizontal surface that will support the weight of
the machine.
Min. 10cm
Min. 10cm
Water connection
Connect the supplied water hose to the cold water connection using a ½’’
R-connection(A). When pushing the machine into position make sure there is
no interference to the hose to ensure proper water flow.
Water supply to the machine is the customer’s responsibility according to
instruction and advice from the supplier.
In areas with high level lime problem, a descaling filter should be mounted.
A
Note:
Make sure air is able to circulate behind the machine
(minimum 10cm).
i
Note:
The new hose set supplied with the appliance shall be used and
that old hose sets shall not be reused. Connection to a closable
valve is recommended. Min. water pressure; 2bar (200kPa). Max.
waterpressure; 8bar (800kPa).
i
