background image

OPERATING MANUAL 

LSG 33 

Coffee Lab Grinder 

Copyright: 

All  rights  to  this  technical  documentation  reserved.  This 

documentation is intended only for the personal use of the owner of the coffee 
grinder.  No  part  of  the  technical  specifications,  drawings  and  illustrations 
contained in this documentation may be reproduced, circulated or used for the 
purpose  of  competition  or  disclosed  to  others  without  the  express  written 
permission. 

Warnings and Handling 

1. This  Grinder  is  not  intended  for  use  by  persons  (including  children)  with
reduced  physical,  sensory  or  mental  capabilities,  or  lack  of  experience  and 
knowledge, unless they have been given supervision or instruction concerning 
use of the Grinder by a person responsible for their safety.  
2. Children  should  be  supervised  to  ensure  that  they  do  not  play  with  the
Grinder. 
3. Care is needed when handling cutting blades during cleaning.
4. If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard. 

Coffee Laboratory 589 Rappahannock Drive White Stone Va 22578 TEL (804) 435-5522 www.coffeelabequipment.com

Summary of Contents for LSG 33















Reviews: