Coemar Risalto Led M, Manual, Page: 11 / 27

11
5
. Powering up
5.2
Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities must be used ex-
clusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested to 2 KV, operating temperature -40°C +
180°C, Coemar cod. CV5311).
Connection to mains power
Risalto Led M equipped with two power connectors, one as input and one as output, which can be used to feed
up to 8 (at 230 V) or 4 (at 115 V) fixtures.
The max absorption of Risalto Led M is reported in the following table:
- 230 V 0.92 A constant during normal exercise.
- 115 V 1.83 A constant during normal exercise.
5.1
Operating voltage and frequency
The unit may operates at voltages ranges from 85 to 264 V at a frequency of 50 or 60 Hz. It is not needed to
effect any setup procedures:
Risalto Led M
will automatically adjust its operation to suit any frequency or volt-
age within this range.
brown
blue
yellow / green
fase
neutral
mass