Italiano
9
5
. Powering up
5.1
Operating voltage and frequency
The unit may operates at voltages ranges from 80 to 264 V at a frequency of 50 or 60 Hz. It is
not needed to effect any setup procedures:
ReLite Led Kit
will automatically adjust its opera-
tion to suit any frequency or voltage within this range.
Warning!!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence
to regulatory norms is strongly recommended.
Ensure that the mains characteristics are within the recommended range for the
use of
ReLite Led Kit
.
All connections should be carried out by a suitably qualified personnel.
5.2
Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International
standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities
must be used exclusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested to 2 KV, op-
erating temperature -40°C + 180°C, Coemar cod. CV5311).
Connection to mains power
ReLite Led Kit
is equipped with two power connectors, one as input and one as output.
5.3 Supply cable characteristics
The supply cable complies to the most recent safety norms.
IN
OUT