Italiano
4
Congratulations on having purchased a
Coemar
product. You have assured yourself of a
fixture of the highest quality, both in componentry and in the technology used. We renew
our invitation to you to complete the service information on the previous page, to expedite
any request for service information or spares (in case of problems encountered either during,
or subsequent to, installation). This information will assist in providing prompt and accurate
advice from your
Coemar
service centre. Following the instructions and procedures outlined
in this manual will ensure the maximum efficiency of this product for years to come.
1.
Packaging and transportation
1.1
Packaging
Open the packaging and make sure that no part of the equipment has suffered any damage
during the transportation. In case of damage to the fixture, contact your currier and your
supplier immediately by telephone, fax or email, and inform them you will formally notify
them in writing through registered letter.
Packing list
Make sure the packaging contains:
1 ReLite Led
1 Instruction manual
2
. General information
2.1
Important Safety information
Fire prevention:
1.
Never locate the fixture on any flammable surface.
2.
Minimum distance from flammable materials: 0,5m.
3.
Minimum distance from the closet illuminable surface: 0,5m.
4.
Replace any blown or damaged fuse only with those of identical values.
Refer to the schematic diagram if there is any doubt.
5.
Connect the projector, where the
ReLite Led
is installed, to mains power
protected by a thermal magnetic circuit breaker.
Prevention from electric shock:
1.
Presence of high voltage inside of the fixture. Insulate the fixture from
mains supply before opening or performing any function which involves
touching the inside of the fixture, including lamp replacement.
2.
For the connection to the mains, adhere strictly to the guidelines outlined
in this manual.
1.2
Transportation
The
ReLite Led
must be transported exclusively in its original packaging.
