Coemar REFLECTION LEDko EXT FullSpectrum RGBLA with gobo rotator, Instruction Manual, Page: 15 / 36

15
Warning!!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regula-
tory norms is strongly recommended.
LEDko EXT FullSpectrum RGBLA
should not be powered through a dimmer as this may
damage the internal switching power supply.
Prior to connecting the device to mains power, ensure that the mains characteristics are
within the recommended range for the use of
LEDko EXT FullSpectrum RGBLA
.
All cabling and connections should be carried out by a suitably qualified personnel.
Warning!
Make sure that screening and conductors are not in contact one another or with the metal
housing of the connector.
Pin#1 and housing never must be connected to the power supply unit.
6.1
Control signal connection by XLR5 plugs
The digital control signal is transmitted to the projector via a two pole cable screened as per
International standards for the transmission of DMX 512 data. The connection must be serial,
using connectors XL5 male and female located on the back of
LEDko EXT FullSpectrum
RGBLA
labelled DMX512 IN e OUT (see diagram).
Connectors equipped on LEDko EXT FullSpectrum RGBLA are IP rated, which ensures pro-
tection against water and dust. In order to keep this rating they must be connected exclusively
to other IP rated connectors.
6
. Control signal connections
DMX IN
DMX OUT